Lathe HAAS TL-2

Lathe HAAS TL-2
Low working hours
View price
You can purchase this machine from us directly, which gives you:
Secured payment
for the purchase
Dedicated compliance check
of the seller
Logistics and customs support
if applicable
After-sale follow up
if needed
Contact us to receive an offer. HAAS
TL-2
2005
France
Lathes - CNC lathes
P260626113
Turning length
1219 mm
Turning Ø
406 mm
Ø above the bed
406 mm
Ø above transversing slide
282 mm
Length between centers
1219 mm
Type of CNC
Fanuc
X-axis
203 mm
Z-axis
1219 mm
Max workpiece weight
2087 kg
Spindle taper
A2-6
Spindle bore
76.2 mm
Number of turrets
1
Number of tools on turret
1
Number of rotating tools
0
Turning speed
2000 rpm
Spindle motor power
8.9 kW
Tailstock
yes
Bar feeder
no
Length x width x height
2515.0 × 1727.0 × 1981.0
Weight
2087 kg
229 hours
944 hours
excellent
under power
26/06/2026
For sale is a HAAS TL-2 CNC Toolroom Lathe, manufactured in 2005. This lathe is equipped with a HAAS CNC control system and features manual handwheels that enable easy conversational or manual machining. The machine dimensions are approximately 2515 mm in length, 1727 mm in width, and 1981 mm in height, with a total weight of 2087 kg. It offers a turning length and length between centers of 1219 mm, a maximum turning diameter above the bed of 406 mm, and a spindle bore diameter of 76.2 mm. The X-axis travel is 203 mm and the Z-axis travel is 1219 mm. The spindle motor provides 8.9 kW of power, and the spindle speed reaches up to 2000 rpm. The lathe includes one turret with a single tool holder and does not have rotating tools. It can handle a maximum workpiece weight of 2087 kg. The machine comes with a coolant system and an included tailstock. A 3-jaw chuck is also part of the package, visible in the lathe interior. There is a tool post mounted on the carriage with a tool holder and cutting tool attached, and a coolant hose is connected to the lathe carriage. The lathe bed and carriage surfaces appear clean and well-maintained, showing only minor signs of use. The sliding doors have red handles, and the manual handwheels are also equipped with red handles for convenient operation. The CNC control panel is powered on and displays operational data including power-on time of approximately 944 hours, cycle time of 229 hours, and feed cutting time of 121 hours, indicating relatively low usage for a machine of this age. Attached to the control panel is a MOXA NPort W2150 Plus wireless serial device server, installed with duct tape, which facilitates wireless CNC program transfer. Included with the lathe is a large set of tooling and accessories such as multiple tool holders, drill holders, boring bar holders, a live center, and other machining accessories. These tools are organized on a shelf and show signs of use but appear to be in good condition. This HAAS TL-2 CNC lathe is clean, well-maintained, and ready for immediate use. It is available for inspection and demonstration under power. HAAS TL-2 CNC Toolroom Lathe – 2005 – Excellent Condition – Very Low Hours
Price
Description
For sale: HAAS TL-2 CNC Toolroom Lathe, year 2005, in excellent working condition. The machine has been professionally maintained and has seen very limited use throughout its lifetime. It is currently powered and available for inspection and demonstration. Machine specifications
Manufacturer: HAAS
Model: TL-2
Year: 2005
CNC Control: HAAS
Manual handwheels for easy conversational/manual machining
Coolant system
Tailstock included
3-jaw chuck included
Machine hours
Current controller counters:
Power-on time: 944 hours
Cycle time: 229 hours
Feed cutting time: 121 hours
The machine has exceptionally low recorded operating hours for its age. Included with the machine
Large set of tooling and accessories including:
Multiple tool holders
Drill holders
Boring bar holders
Live center
Additional machining accessories
A MOXA wireless serial/wifi communication module is also installed for easy CNC program transfer. Condition
Fully operational
Machine can be inspected under power
Very clean overall condition
Ready for immediate use
Factory – large company
2012
1
June 26, 2026
Factory – large company
2012
1
June 26, 2026