DMG MORI Sprint 65 liniowa tokarka CNC

DMG MORI Sprint 65 linear CNC lathe
Top seller
Make an offer
DMG MORI
Sprint 65 linear
2015
Czech Republic
Lathes - CNC lathes
P260414274
+34 679 …
Turning length
mm
Turning Ø
175 mm
Ø above the bed
65 mm
Ø above transversing slide
mm
Length between centers
mm
Type of CNC
X-axis
165 mm
Z-axis
678 mm
Max workpiece weight
kg
Spindle taper
Spindle bore
mm
Number of turrets
Number of tools on turret
Number of rotating tools
Turning speed
5000 rpm
Spindle motor power
20 kW
Tailstock
no
Bar feeder
no
Length x width x height
4500.0 × 1990.0 × 2300.0
Weight
9500 kg
as-is, where-is
Datasheet
Dmg Mori SPRINT 65 linear
25/04/2026
This DMG MORI Sprint 65 linear CNC lathe, manufactured in 2015, is designed for high-precision turning tasks with a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine features two turrets, each equipped with 12 driven tool positions, allowing for versatile and efficient machining operations. It offers a maximum spindle speed of 5000 rpm, powered by a 20 kW spindle motor, suitable for a range of turning applications. The machine's CNC control system is a FANUC 310, managing 8 axes including X and Z axes with travels of 165 mm and 678 mm respectively, and a Y-axis travel of 80 mm. Additional features include rigid tapping, polygonal turning software for both slides, constant cutting speed control, and spindle speed regulation. The tool system uses VDI 30 holders with a maximum driven tool speed of 4000 rpm. Physical dimensions of the machine are approximately 4500 mm in length, 1990 mm in width, and 2300 mm in height, with a weight of 9500 kg. The machine is equipped with an IEMCA MASTER 865 MP 43 L bar feeder, facilitating automated bar feeding operations. Coolant systems include a tank capacity of around 650 liters and pumps with a maximum capacity of 20 liters per minute at 7 bar pressure. Additional equipment includes a swarf conveyor belt, counterspindle collet cleaning with coolant, and workpiece unloading belt. The machine is prepared for oil mist filtration and features angular synchronism between main and counter spindles. Safety and operational aids include a quadruple warning light and automatic machine shutdown. The machine appears clean and well-maintained, with minor signs of use but no visible damage. It is installed in a well-lit industrial environment, featuring a control panel mounted on the side and an attached blue bar feeder. Orange flexible tubing and multiple chip conveyors are present, indicating integrated coolant and chip management systems. Documentation folders are clipped to the machine for operator reference. Overall, this DMG MORI Sprint 65 linear lathe is a robust and versatile solution for demanding turning applications. This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine is equipped with two turrets, each with 12 driven tool positions, and offers a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details.Control system: CNC 310 is
Total hours: 61295 h
Operating hours: 42222 h
Main spindle power 20/25 kW
Counter spindle power 17 kW
Max. main spindle speed: 5000 rpm
Max. counter spindle speed: 5000 rpm
Max. main spindle bar diameter: 65 mm
Max. counter spindle bar diameter: 45 mm
CNC CONTROLLED AXES
Stroke X1 165 mm
Rapid speed X1 30 m/min
Acceleration X1 5 m/s2
Stroke Z1 678 mm
Rapid speed Z1 30 m/min
Acceleration Z1 5 m/s2
Stroke Y1 80 (+50/-30) mm
Rapid speed Y1 30 m/min
Acceleration Y1 5 m/s2
Stroke X2 165 mm
Rapid speed X2 30 m/min
Acceleration X2 5 m/s2
Stroke Z2 640 mm
Rapid speed Z2 30 m/min
Acceleration Z2 5 m/s2
Stroke W2 690 mm
Rapid speed W2 30 m/min
Acceleration W2 5 m/s2
Number of turrets 2
Number of rotating tools each station 12 all driven positions
Tool system VDI 30
Max driven tool speed 4.000 rpm
Approx. coolant tank capacity 650 l
Coolant pump max.capacity (per each turret) 20 l/min
Pump pressure 7 bar
Power supply 91 kVA
LxWxH of the machine 4.500x1.990x2.300 mm
Approx. machine weight 9.500 kg
IEMCA MASTER 865 MP 43 L bar feeder
Base machine configuration:
- Drive for slide 1 and 2 (all 12 pos.)
- C-axis for main and counter spindle
- Y-axis for slide 1
- Swarf conveyor belt type
- Counterspindle collet cleaning with coolant
- Workpiece unloading including belt
- Mechanical preparation for oil mist filter
- Electrical and software interface for bar loader
- Angular synchronism between main and counter spindle
- Automatic machine shut down
- 2 additional on/off outputs (4 M-functions)
- Rigid tapping
- Piece and time counter
- Software for polygonal turning for slide 1 and 2
- Constant cutting speed
- Helical interpolation for slide 1
- Spindle speed control
- Quadruple warning light
- Cooling device for electrical cabinet
Added options:
I-V50011 Collet chuck Type "MPF 65/140" without axial
feed for main spindle max. diameter: 65mm. Clamping elements and other equipment:
I-V50025 Manual collet changer
type "SACO MPT65/140 and MPF65/140"
I-V50092 Differential pressure for counterspindle, possibility of setting two different clamping pressures. I-V50083 1 set of soft jaws for chuck
type "SMW 175-BBD"
I-V50080 Chuck type "SMW 175-BBD"
For counter spindle, including adapter for adapting the spindle
Control system options
I-V12060 Tool wear monitoring system
Monitor for CNC FANUC
I-V12070 Sister tool selection system for Tool
Monitor for CNC FANUC
Hydraulic and filtration equipment
I-V40045 External flushing of jaws/collets with coolant
on main spindle and counter spindle
Various new spare parts are included. Control Brand: FANUC
Control Model: 310
Counter Spindle: yes
Driven Tools: yes
Machine Height: 2300 mm
Machine Length: 4500 mm
Machine Weight: 9500 kg
Machine Width: 1990 mm
Max. Bar Diameter: 65 mm
Number of Axes: 8
Spindle Speed: 5000 RPM
X-axis Travel: 165 mm
Y-axis Travel: 80 mm
2019
1985
April 26, 2026
GINDUMAC GmbH
Top seller
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation. Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers. Turning length
mm