Tokarka CNC Okuma LU35- M

Okuma LU35-M CNC lathe
Top seller
Make an offer
Okuma
LU35-M
2008
Germany
Lathes - CNC lathes
P260415576
+34 679 …
Turning length
mm
Turning Ø
550 mm
Ø above the bed
mm
Ø above transversing slide
mm
Length between centers
mm
Type of CNC
X-axis
350 mm
Z-axis
920 mm
Max workpiece weight
kg
Spindle taper
Spindle bore
90 mm
Number of turrets
Number of tools on turret
Number of rotating tools
Turning speed
3200 rpm
Spindle motor power
kW
Tailstock
no
Bar feeder
no
Length x width x height
5200.0 × 2600.0 × 2600.0
Weight
13500 kg
as-is, where-is
Datasheet
Okuma LU35
24/04/2026
This Okuma LU35-M CNC lathe, manufactured in 2008, is a robust 4-axis horizontal turning machine designed for precision machining. It offers a maximum turning diameter of 550 mm and a Z-axis travel of 920 mm, complemented by an X-axis travel of 350 mm. The spindle features a bore diameter of 90 mm and operates at speeds up to 3200 rpm, powered by a 40 kW spindle motor. The machine is equipped with two revolvers: Revolver A has 12 tool stations and Revolver B has 10, totaling 22 stations, supporting a versatile tooling setup. The control system is the OSP-P200L, providing reliable CNC operation. The machine's physical dimensions are approximately 5200 mm in length, 2600 mm in width, and 2600 mm in height, with a weight of 13,500 kg. It runs on a 400 V, 3-phase, 50 Hz power supply with a rated capacity of 53.1 kVA. The machine includes a chuck mounted on the spindle and a tool turret below it. Its hydraulic and coolant pump systems are visible, featuring motors and connected pipes, with a coolant tray that shows signs of regular use. Accessories such as a blue coiled air hose and a roll of paper towels for maintenance are present. The control panel is mounted on the right side, equipped with buttons and a display screen. The exterior shows minor signs of use and dirt, typical for a machine in operational condition. Electrical maintenance was performed approximately 1.5 years ago, during which some electrical components were replaced or cleaned. Optional extras are available for an additional charge, including around 100 tools, clamping elements, chuck jaw sets, 2-jaw chucks, and a zero-point clamping system. This machine is suitable for users seeking a powerful and versatile CNC lathe with comprehensive tooling capabilities and a well-maintained operational history. This 4-axis Okuma LU35-M was manufactured in 2008. It features a maximum turning diameter of 550 mm and a Z-axis travel of 920 mm. The machine is equipped with two revolvers, offering a total of 22 tool stations, and operates at a spindle speed of 3200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LU35-M horizontal turning machine we have for sale. Contact us for further details.Maintenance Contract: Yes
Utilization: 85%
Shifts: 2
Number of Tools: 12
Number of Revolvers/Magazines: 2
Maximum Turning Diameter: 550 mm
Control System: OSP-P200L
Revolver A: 12 stations
Revolver B: 10 stations
Spindle Bore: 90 mm
Supply Voltage: 400 V
Phase: 3
Frequency: 50 Hz
Rated Capacity: 53.1 kVA
Full Load Current: 76.7 A
Largest Motor Rating: 134 A
Interrupt Capacity: 10 kA
X-axis travel (A turret): 350 mm (corresponds to max Ø700 mm)
X-axis travel (B turret): 240 mm (corresponds to max Ø480 mm)
OPTIONAL for an additional charge: around 100 x tools, Clamping elements, chuck jaw sets, 2-jaw chucks, zero-point clamping system
Electrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned
Counter Spindle: no
Driven Tools: no
Machine Height: 2600 mm
Machine Length: 5200 mm
Machine Weight: 13500 kg
Machine Width: 2600 mm
Number of Axes: 4
Number of Tools: 100
Spindle Power: 40 kW
Spindle Speed: 3200 RPM
Taper Size: VDI 50
X-axis Travel: 350 mm
Z-axis Travel: 920 mm
2019
1984
April 25, 2026
GINDUMAC GmbH
Top seller
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation. Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers. Turning length
mm
Turning Ø
550 mm
Ø above the bed
mm
Ø above transversing slide
mm
Length between centers
mm