Hurco CNC TMX 8 MYSi CNC tokarka

Hurco CNC TMX 8 MYSi CNC lathe
Top seller
Make an offer
Hurco
CNC TMX 8 MYSi
2023
Germany
Lathes - CNC lathes
P260226302
+34 679 …
Turning length
560 mm
Turning Ø
508 mm
Ø above the bed
335 mm
Type of CNC
X-axis
203 mm
Z-axis
560 mm
Spindle taper
Number of tools on turret
12
Turning speed
4500 rpm
Spindle motor power
25 kW
Tailstock
no
Bar feeder
no
Weight
7500 kg
as-is, where-is
23/04/2026
The Hurco CNC TMX 8 MYSi is a 5-axis turn-mill center manufactured in 2023, designed for precision machining with substantial capabilities. It supports a maximum turning diameter of 508 mm and a turning length of 560 mm, with a maximum part diameter over the bed of 335 mm. The machine features a robust main spindle motor power of 25 kW, delivering a maximum spindle speed of 4,500 rpm. The sub-spindle reaches up to 6,000 rpm, allowing for versatile machining operations. The machine’s tool turret accommodates 12 tools, utilizing a VDI 40 interface, and supports driven tools with speeds up to 5,000 rpm, powered at 6.3 kW with 28 Nm torque. Axis travels include 203 mm on the X-axis and 560 mm on the Z-axis, with rapid traverse rates of 24 m/min for the X-axis, 12 m/min for the Y-axis, and 30 m/min for the Z and W axes. Positioning accuracy is 0.01 mm with repeatability of 0.005 mm, ensuring high precision. This unit weighs approximately 7,500 kg and operates on a 400 V, 50 Hz, three-phase electrical supply. The coolant system has a capacity of 203 liters. The machine is equipped with a main spindle chuck size of 203 mm and a sub-spindle chuck size of 150 mm, with bar capacities of 64.5 mm and 46 mm respectively. The CNC lathe includes a control panel with dual monitors and an emergency stop button for operator convenience and safety. The machining area is accessible through a door, and the interior is clean and well-maintained. Safety warning labels are present on the machine near the door and control panel. A coolant or chip conveyor system is attached, accompanied by a cooling or filtration unit with gauges and controls. Various hand tools are stored on a rack attached to the machine's side. Overall, the exterior shows minor signs of use but remains in good condition, with no visible damage to critical components. This Hurco TMX 8 MYSi is suitable for users seeking a high-quality, versatile CNC turn-mill center with extensive tooling and axis capabilities. This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine includes a tool turret with 12 stations and a rapid traverse of 24 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Hurco CNC TMX 8 MYSi turn-mill centre. Contact us for further details.X-axis travel: 203 mm
Y-axis travel: ±55 mm
Z-axis travel: 560 mm
W-axis travel: 640 mm
Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min
Positioning accuracy: 0.01 mm
Repeatability: 0.005 mm
Max turning diameter: 508 mm
Max turning length: 560 mm
Max part diameter over bed: 335 mm
Tool turret: VDI 40
Number of stations: 12
Max driven tool speed: 5000 rpm
Driven tool power: 6.3 kW
Driven tool torque: 28 Nm
Main spindle max speed: 4500 rpm
Sub-spindle max speed: 6000 rpm
Synchronous spindle speed: 2500 rpm
Main spindle power (S6 / S1): 25 / 17.2 kW
Sub-spindle power (S6 / S1): 15 / 11 kW
Main spindle torque (S6 / S1): 239 / 164 Nm
Sub-spindle torque (S6 / S1): 102 / 75 Nm
Main spindle chuck size: 203 mm
Sub-spindle chuck size: 150 mm
Main spindle bar capacity: 64.5 mm
Sub-spindle bar capacity: 46 mm
Electrical supply: 400 V, 50 Hz, 3 phase
Largest motor: 22 kVA
Largest motor current: 32 A
Full load: 58 kVA
Full load current: 83 A
Short circuit rating: 5 kA RMS symmetrical
Interrupt capacity: 10000 A
Max ambient temperature: 35 °C
Coolant tank capacity: 203 L
Machine weight: 7500 kg
Transport weight: 8250 kg
The BMT65 mounts are included; swivel mounts are not. Number of Axes: 5
2019
1972
April 24, 2026
GINDUMAC GmbH
Top seller
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation. Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.