MORI SEIKI CL 150 CNC lathe

MORI SEIKI CL 150 CNC lathe
Top seller
View price
MORI SEIKI
CL 150
1998
Germany
Lathes - CNC lathes
P260612250
+34 679 …
Turning length
303 mm
Turning Ø
400 mm
Ø above the bed
515 mm
Ø above transversing slide
mm
Length between centers
mm
Type of CNC
X-axis
235 mm
Z-axis
310 mm
Max workpiece weight
kg
Spindle taper
Spindle bore
43 mm
Number of turrets
Number of tools on turret
Number of rotating tools
Turning speed
6000 rpm
Spindle motor power
7.5 kW
Tailstock
no
Bar feeder
no
Length x width x height
2500.0 × 1700.0 × 1700.0
Weight
2500 kg
as-is, where-is
Datasheet
Mori Seiki CL 1500 T
16/06/2026
The MORI SEIKI CL 150 is a horizontal CNC lathe machine manufactured in 1998, designed for precision turning tasks. It features a maximum turning diameter of 400 mm and a maximum turning length of 303 mm, with a swing over the bed measuring 515 mm. The spindle bore diameter is 43 mm, and the spindle motor delivers a power output of 7.5 kW, capable of reaching speeds up to 6000 rpm. The machine offers an X-axis travel of 235 mm and a Z-axis travel of 310 mm, supporting two-axis operations. This lathe is equipped with a control panel located on the right side, which includes a screen, keypad, various buttons and knobs, as well as an emergency stop button for safety. Inside the machine enclosure, the lathe chuck and tool turret are visible, facilitating efficient tool management during operation. The control system is identified as a MITSUBISHI MSC-803. The machine's electrical specifications include a voltage rating of AC 200 V, a frequency of 50 Hz, and a full load current of 67 A, with the spindle motor current rated at 74 A. The rated power consumption is 23 kVA. The machine dimensions are approximately 2500 mm in length, 1700 mm in width, and 1700 mm in height, with a weight of 2500 kg. The exterior of the machine shows signs of wear and rust on the metal surfaces, indicating usage over time. The electrical rating plate and rotary switch on the machine appear intact with minor surface wear. This MORI SEIKI CL 150 lathe is suitable for users seeking a robust CNC turning machine with solid specifications and a comprehensive control panel setup. Horizontal turning machine manufactured in 1998. This MORI SEIKI CL 150 features a maximum turning diameter of 400 mm and a maximum turning length of 303 mm. It includes a spindle speed range of 60 - 6000 rpm and a turret with 12 stations for efficient tool management. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI CL 150 machine we have for sale. Contact us for further details.Control Unit Defective: At least data loss or damaged circuit board (unverified diagnosis)
Swing Over Bed: 515 mm
Maximum Turning Diameter: 400 mm
Standard Turning Diameter: 176 mm
Standard Turning Length: 150 mm
Maximum Turning Length: 303 mm
Spindle Centre Height: 950 mm
Spindle Nose: A2-5
Spindle Bore: 43 mm
Spindle Bearing Inner Diameter: 80 mm
Standard Chuck Diameter: 169 mm
Tool Size for External and Facing Tools: 20 x 20 mm
Number of Turrets: 1
Number of Turret Stations: 12
Turret Index Time: 0.7 sec
Turret Clamping Force: 2300 Nm
Index Coupling Diameter: 180 mm
Automatic Tool Selection Logic: Yes
X-Axis Motor Power: 1.5 kW
Z-Axis Motor Power: 2.0 kW
Manual Feed Rate: 0 - 1260 mm/min
Programmable Feed Rate: 0.001 - 500 mm/rev
Rapid Traverse X-Axis: 30 m/min
Rapid Traverse Z-Axis: 30 m/min
Positioning Resolution: 0.001 mm
Coolant Tank Capacity: 123 l
Coolant Pump Capacity: 13 l/min
Lubrication: Automatic Central Lubrication
Power Supply: 380 V / 3 Phase / 50 Hz
Control Voltage: 200 V AC / 24 V DC
Connected Load: 20 kVA
Rated Power: 23 kVA
Full Load Current: 67 A
Spindle Motor Current Rating: 74 A
Interrupting Capacity: 5 kA
Frequency: 50 Hz
Voltage: AC 200 V
Phase: 3
Control Brand: MITSUBISHI
Control Model: MSC-803
Counter Spindle: no
Driven Tools: no
Machine Height: 1700 mm
Machine Length: 2500 mm
Machine Weight: 2500 kg
Machine Width: 1700 mm
Max. Bar Diameter: 32 mm
Number of Axes: 2
Spindle Power: 7.5 kW
Spindle Speed: 6000 RPM
X-axis Travel: 235 mm
Z-axis Travel: 310 mm
2019
2033
June 18, 2026
GINDUMAC GmbH
Top seller
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation. Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.